Yeah I read that article.. Don’t connect your phone or cable yet. Very nice to hear that this worked for you, but btw, my multimeter is broken i have problems with checking out the lines Posted February 8, Is it possible to get that work? For some reason the latest drivers from the Prolific website http:
|Date Added:||20 December 2018|
|File Size:||60.92 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
DRIVERS FOR PROLIFIC DKU-5
Double click the driver download to extract it. Fake vs real post regarding PLs http: Website Design by Alvitr.
TX nothing Black wire: And if it works, just connect the cable to the tx and rx pins accordingly, and the ground wire which will be the cable’s shielding probably to the ground pin of the router otherwise you’ll get garbage. Introduction to Microsoft Help Workshop 4. Input Devices rpolific, etc.
Windows 10, Windows 8.
Follow the instructions; connect your cable and phone and then the cable to the computer; make sure your phone isn’t security locked. Posted February 8, Visit our Driver Support Page for helpful step-by-step videos.
Im just concerned with the NO 3. Confirm the path and click ‘Install’. Don’t connect your phone or cable yet. You may need a cable driver for your cable.
DKU-5 Cable Prolific Driver error Nokia PC Suite 6.2 – 6.4
If its just the reset thats the problem, you can press the manual reset at the right time and it should go. However, have you tried the 3rd party programs like I have suggested e. It’s not quite as simple as plugging in the phone via the cable since it isn’t a USB device and the cable requires a USB-Serial driver.
You won’t get any options for proliifc installer. It is working with the drivers.
I was looking at doing this a while back and just saved myself the trouble by buying prolidic of these. It is a software utility that will find the right driver for you – automatically.
HowTo Install Nokia PC Suite For A DKU-5 Cable –
After driver is installed automatically. So after a long while of procrastination and shipping time I finally recieved my DKU-5 cable in the mail yesterday. Make your Arduino USB for only 1 dollar! You can now connect the cable to the phone and then the cable to the computer.
Make your Arduino USB for only 1 dollar!
TX should be giving me 3. Also works with CA type cables about the same price.
We could much better ddku-5 it, when you have upload a picture of your cable board. You have to check the voltage levels of the rx and tx pins of the connector, they must be 3,3V. You can now use the ‘File Manager’ to navigate to your Inbox or gallery or any other folders that show up, depending on your phone model, and copy paste to it.
It has to be this one: I’ll try and get some pics up tonight when I get home from work. Hi dkku-5 I read this article- https: Prolific advices end-users to only purchase vendor branded cable products with company name contact information for service and support.
Try it on another computer and with another phone to make sure there isn’t a problem with either your phone or your cable. The serial port of a PC works at 12V, which would damage the router when connected directly, if the cable doesn’t decrease the voltage it cannot be used.